Q: What Design Considerations Are Important for Brass CNC Machined Parts?

When designing brass parts for CNC machining, consider: Diseño del hilo : Brass excels in threaded applications; UNC or UNF threads are preferable to metric threads for optimal strength. Corner radii : Design internal corners with minimum 0.8mm radius to accommodate standard tooling. Dilatación térmica : Brass has a thermal expansion coefficient of approximately 20 μm/m·°C, which should be considered for tight-tolerance applications. Wall thickness variations : Maintain consistent wall thickness where possible to prevent distortion. Ángulos de giro : Though not required, 1-2° draft angles on deep pockets can improve tool access and surface finish. Deep hole limitations : For holes deeper than 5× diameter, consider using special tooling or alternative manufacturing methods.

Question 1

Which Industries are CNC Machining Personalized Brass Components appropriate for?

Accepted Answer

Brass cnc machined components are typically utilized in electrical power, residence devices, construction, vehicle market, industrial equipments, and also the excellent look makes brass components incredibly popular in home accessories.

Question 2

What Are the Typical Surface Area Treatments of CNC Machining Copper Parts?

Accepted Answer

Due to the influence of the atmosphere, the surface of brass components will be oxidized to various levels, so various surface area treatment procedures require to be utilized.

Commonly used brass parts surface treatment procedures are as adheres to:

1) Bright cleansing of brass parts
2) Passivation of brass components
3) Anodizing of brass parts
4) CNC machining brass components for electroplating (zinc, nickel, chrome) treatment
5) Chemical sprucing up of copper parts

Question 3

What Are the Size Limitations for Brass CNC Machined Parts?

Accepted Answer

Our CNC machining capabilities allow us to produce brass parts ranging from very small components (minimum feature size of approximately 0.5mm) up to large parts measuring 500mm × 500mm × 500mm. For larger parts, we can employ multiple setups or alternative manufacturing methods. Minimum wall thickness for brass parts is typically 0.5mm, though for structural integrity we recommend 0.8mm or greater depending on the specific design requirements.

Question 4

How Does the Cost of Brass CNC Machining Compare to Other Materials?

Accepted Answer

While raw brass material costs are typically higher than aluminum (approximately 20-30% more), the total machining cost is often comparable due to brass&#8217;s excellent machinability. Brass allows for faster cutting speeds, longer tool life, and frequently requires fewer operations to achieve the desired finish. For high-volume production, the material cost difference becomes more significant, but this can be offset by brass&#8217;s superior durability and corrosion resistance, potentially reducing lifetime costs for the end product.

Question 5

What Are Common Challenges When Machining Brass and How Do You Address Them?

Accepted Answer

The primary challenges in brass CNC machining include:

Lead content regulations: We offer both leaded (C360) brass for maximum machinability and lead-free alternatives (C69300) for applications subject to environmental regulations.
Chip control: Brass produces long, stringy chips that can wrap around tooling. We use specialized chip breakers and programming techniques to manage chip formation.
Surface finish consistency: Achieving uniform appearance across multiple production runs can be challenging. Our standardized processes and quality control ensure consistency.
Tool selection: Despite brass&#8217;s good machinability, tool geometry must be optimized. We use specialized tooling with appropriate rake angles for brass machining.

Question 6

What Quality Control Measures Do You Implement for Brass Components?

Accepted Answer

Our quality control process for brass components includes:

First article inspection with detailed dimensional verification
In-process sampling at defined intervals
CMM (Coordinate Measuring Machine) verification for complex geometries
Surface finish measurement and visual inspection
Verificación de la certificación de materiales
Functional testing when applicable
Final inspection with detailed reporting

All inspections are documented and performed according to our ISO 9001:2015 quality management system.

Question 7

What's the Difference Between Regular and Free-Machining Brass?

Accepted Answer

Regular brass typically contains 60-70% copper and 30-40% zinc without additional elements. Free-machining brass, such as C360, contains approximately 3% lead which significantly improves machinability by acting as a chip breaker and lubricant during cutting. The lead content reduces tool wear, allows higher cutting speeds, and produces better surface finishes.

For applications where lead content is restricted (such as potable water systems or certain consumer products), we offer lead-free alternatives like C69300 (ECO BRASS) which achieve good machinability through alternative alloying elements such as silicon and phosphorus.

Question 8

What Design Considerations Are Important for Brass CNC Machined Parts?

Accepted Answer

When designing brass parts for CNC machining, consider:

Diseño del hilo: Brass excels in threaded applications; UNC or UNF threads are preferable to metric threads for optimal strength.
Corner radii: Design internal corners with minimum 0.8mm radius to accommodate standard tooling.
Dilatación térmica: Brass has a thermal expansion coefficient of approximately 20 μm/m·°C, which should be considered for tight-tolerance applications.
Wall thickness variations: Maintain consistent wall thickness where possible to prevent distortion.
Ángulos de giro: Though not required, 1-2° draft angles on deep pockets can improve tool access and surface finish.
Deep hole limitations: For holes deeper than 5× diameter, consider using special tooling or alternative manufacturing methods.

Grado	Composición	Propiedades	Grado de maquinabilidad	Tolerancias típicas	Aplicaciones comunes
C360 Brass	61.5% Cu, 35.5% Zn, 3% Pb	Excelente maquinabilidad Alta resistencia Moderate corrosion resistance Tensile strength: 340-469 MPa Yield strength: 124-310 MPa Elongation: 15-53%	100% (Standard)	±0.001“ for diameters ±0.002“ for lengths	Screws, bolts, gears Valves, fasteners Componentes de precisión
C260 Brass	70% Cu, 30% Zn	High ductility Excellent formability Buena resistencia a la corrosión Tensile strength: 303-496 MPa Yield strength: 75-434 MPa Elongation: 3-68%	30%	±0.002“ for diameters ±0.003“ for lengths	Electrical connectors Plumbing fittings Decorative hardware
C230 Brass (Red Brass)	85% Cu, 15% Zn	Excelente resistencia a la corrosión Good strength Moderate machinability Tensile strength: 310-448 MPa Yield strength: 69-345 MPa Elongation: 15-65%	20%	±0.002“ for diameters ±0.003“ for lengths	Marine hardware Componentes de la bomba Heat exchangers
C385 Brass (Architectural Bronze)	57% Cu, 40% Zn, 3% Pb	Good machinability Attractive appearance Moderate strength Tensile strength: 331-448 MPa Yield strength: 124-310 MPa Elongation: 15-35%	80%	±0.0015“ for diameters ±0.0025“ for lengths	Decorative architectural elements Door hardware Lighting fixtures

Tipo de proyecto	Plazo de entrega
Muestra urgente de alta precisión	En 24 horas
Nuevo requisito sobre el moho	Producción de moldes en 5 días, entrega de muestras en 7 días
Prototipos estándar	Normalmente 5-7 días
Producción a gran escala	En función de la complejidad del proyecto, a menudo entre 2 y 4 semanas

Característica	Tolerancia estándar	Tolerancia de precisión
External Dimensions	±0.1mm (±0.004″)	±0.025mm (±0.001″)
Internal Dimensions	±0.12mm (±0.005″)	±0.05mm (±0.002″)
Hole Diameters	±0.08mm (±0.003″)	±0.025mm (±0.001″)
Planitud	0.1mm per 100mm	0.05mm per 100mm
Surface Roughness	Ra 3.2μm	Ra 0.8μm

Brass CNC Machining Service

¿Qué es el mecanizado CNC de latón?

Why Choose Brass for CNC Machining?

Servicios de mecanizado CNC de precisión

Common Brass Grades for CNC Machining

Surface Finishes for Brass CNC Machined Parts

Industrias a las que servimos

Why Choose YIJIN Hardware for Brass CNC Machining?

Plazos de entrega flexibles

Fábrica de hardware Yijin

Precision Capabilities with Brass CNC Machining

Standard Tolerances for Brass CNC Machined Parts

Certificado

CNC Machining Brass Components- FAQS

Empiece hoy mismo. Consiga piezas rápidamente.